Price range: ₨ 14,000 through ₨ 27,000
7/.044″ single core copper wire for main lines, sub-mains, and high-load circuits, manufactured in Lahore by Thrive Cables. Made with 99.9% pure copper and fire-retardant PVC insulation, supplied in full-length 90 meter coils at wholesale prices across Pakistan.
Better conductivity
For your safety
Across Pakistan
We’re here to help
The 7/.044″ single core copper wire is the heavyweight of house wiring in Pakistan, used for the main line from the energy meter to the distribution board, sub-mains to upper floors, and high-load circuits for large air conditioners. Thrive Cables manufactures this electric wire in Lahore using high-purity copper and fire-retardant PVC insulation, and supplies it at wholesale prices to dealers, electricians, and contractors across Lahore and the rest of Pakistan. Every coil carries full length and true gauge, so the wire carrying your whole building’s load is exactly the wire you paid for.
The name describes the conductor: seven copper strands, each 0.044 inch in diameter, supplied in the market as the [6] mm² metric size. These are the thickest strands in the standard single core house wiring range, giving the wire the current capacity to feed an entire house or shop while remaining flexible enough to route through conduit and terminate at the main breaker. At Thrive Cables, every strand is drawn from [99.9]% pure electrolytic copper and covered with PVC insulation that resists heat, moisture, and flame spread, making it a safe choice for the most heavily loaded runs in any installation.
The main line carries everything: every light, fan, AC, and appliance in the building draws its current through this one run. If the conductor is undersized or made from mixed-grade copper, the whole installation suffers from voltage drop, the main breaker trips under summer load, and the meter connection heats up. Thrive Cables builds this wire in Lahore with pure copper, fire-retardant PVC, and length checks on every coil. Here is what that means for you:
Carries the full building load: Seven heavy copper strands handle the combined current of lights, sockets, and multiple ACs without running hot.
Stable voltage across the house: Low resistance keeps voltage drop to a minimum, so appliances on the top floor get the same supply as the ground floor.
Fewer breaker trips in summer: A properly sized main line stays cool under peak load instead of tripping when every AC starts together.
Right size, honest copper: A true 7/.044″ conductor, not a thinner wire sold under the same name.
No money wasted on short coils: Every coil is measured and sealed at [90] meters, so you get the full length you paid for.
Secure main connections: Heavy strands sit firmly under meter, isolator, and breaker terminals, reducing the risk of loose, overheating joints.
Longer life in Pakistan: Built to handle summer heat, humidity, and voltage fluctuations, so your wiring keeps working for years without trouble.
7/44 electric wire is the standard choice for main and sub-main runs in homes, shops, and offices across Pakistan, wherever a single conductor has to carry the load of many circuits at once. Builders in Lahore and other cities use it from the meter to the main board and from the main board to each floor in new construction, while electricians install it when upgrading an older main line that can no longer handle modern AC loads. Below are the applications it is best suited for.
For individual AC points and appliance circuits, 7/.036″ (4 mm²) or 2.5 mm² is the economical choice. For larger commercial and industrial loads, ask us about 10 mm² and our power cable range.
Thrive Cables supplies 7/44 wire in bulk at factory-direct wholesale prices. Dealers in Lahore can arrange same-city delivery, while customers in Karachi, Islamabad, Faisalabad, Multan, Peshawar, and other cities receive nationwide dispatch through trusted carriers. Larger orders receive better prices, and regular buyers get priority stock during peak season.
Cheap wire is expensive later. A thin conductor or an under-length coil means higher bills, hotter circuits, and a rewiring job you pay for twice, and on a main line it can mean a burnt meter connection and the whole building in the dark. Thrive Cables protects you from that with tested copper, honest lengths, and consistent quality in every batch produced at our Lahore facility.
The difference shows up on site, not in a brochure: cooler circuits, coils that reach the last room, and no callbacks for burnt joints. That is why dealers in Lahore keep reordering and contractors across Pakistan specify Thrive Cables for their projects.
Tell us your quantity and delivery city, and our team will send you the current wholesale price within hours. Call or WhatsApp +92 324 6570645, or email support@thrivecables.com
| Size | 45 meters, 90 meters |
|---|---|
| Color | Red, Black, Blue, Green, White, Yellow, Pink |
| Coil Length | [90] meters / [100] yards |
| Conductor | [99.9]% pure electrolytic copper |
FAQs
Quick answers on size, coil length, use and delivery. Still have a question? Our team replies on WhatsApp the same day.
Ask on WhatsAppThe price moves with the copper market, so we quote the current wholesale price on request. Contact us on WhatsApp or by phone for today’s price and bulk discounts.
Yes. It is one of the most common sizes for the main line from the meter to the distribution board in Pakistani homes. For very large houses, commercial buildings, or long runs, ask our team to confirm the correct size for your total load.
Both have seven strands, but 7/44 strands are thicker, giving roughly [6] mm² of copper against [4] mm² for 7/36. That extra copper lets 7/44 carry the combined load of a house, while 7/36 is used for individual AC and appliance circuits.
Our standard coil is [90] meters ([100] yards), sealed and labelled with the full length.
Yes. We are based in Lahore and dispatch orders to dealers and contractors across Pakistan, including Karachi, Islamabad, Faisalabad, Multan, and Peshawar.
Reviews
There are no reviews yet.